The Hikvision DS-PDMC-EG2-WE(B) is a wireless magnetic contact detector designed for indoor AX PRO security systems. It mounts easily to door frames, window frames, and cabinets to trigger immediate alerts upon opening.
Hikvision DS-PDMC-EG2-WE(B) AX PRO Wireless Magnetic Contact Detector
This contact features a maximum magnetic detection gap of 43 mm. It includes two external wired inputs to expand the system by connecting wired contacts, and supports Normally Closed (NC), Normally Open (NO), or Impulse Count.
Operating at 868 MHz via two-way Tri-X wireless protocol with AES-128 encryption, it has a 1.6 km open range. It features front and rear tamper protection and runs on a single CR123A battery (up to 5 years standby).
ABS Plastic Construction
Constructed from high-quality abs plastic, the DS-PDMC-EG2-WE(B) provides superior mechanical properties and high structural rigidity. It prevents camera jitter and vibration, ensuring stable, high-definition video feeds in all conditions.
Note: This equipment is designed for professional access control, video intercom, and security operations.
Clean Cable Management
The ax pro wireless magnetic contact detector features a spacious interior channel allowing power and video cables to route cleanly. This internal design protects connections from weathering, corrosion, and vandalism, providing a neat, professional installation.
KEY BENEFITS
- Mounts security and intercom hardware securely on structural surfaces.
- ABS Plastic construction provides high durability and structural rigidity.
- Hollow design routes cables internally, protecting wires from UV/rain.
- Durable white finish resists weathering and prevents degradation.
- Suitable for both demanding indoor and outdoor CCTV installations.
- Pre-drilled mounting holes allow for a secure anchor.
- Weight of approximately 59 g provides strong mechanical support.
- Easy installation with standard Hikvision accessory screw layouts.
- Protects mounting surfaces from localized oxidation and rust.
KEY FEATURES
- AX PRO Wireless Magnetic Contact Detector for security cameras.
- Material: ABS Plastic.
- Surface finish: Weatherproof coating.
- Cable routing: Integrated internal channel.
- Application: Indoor and Outdoor environments.
- Weight: Approximately 59 g.
- Dimensions: 24 mm × 104 mm × 24.4 mm.
- Color: White.
IDEAL FOR
- Commercial building perimeters
- Warehouse brick and concrete walls
- Industrial plant perimeters
- Parking garage pillars and ceilings
- School campus buildings
- Shopping mall exterior walls
- Airport and seaport security structures
- Gated community entrance gates
- Municipal public safety setups
- Public transit platforms
- Hotel exterior walls
- Hospital facility structures
| Specification |
Details |
| Brand |
Hikvision |
| Model |
DS-PDMC-EG2-WE(B) |
| Product Type |
AX PRO Wireless Magnetic Contact Detector |
| Detection Gap |
Max 43 mm |
| External Inputs |
2 wired inputs (NC, NO, or Impulse Count) |
| Wireless Protocol |
Tri-X (868 MHz, AES-128, two-way) |
| RF Distance |
Up to 1.6 km (Open Space) |
| Battery Type |
1x CR123A battery (up to 5 years standby) |
| Tamper Protection |
Front & rear |
| Sensor Dimensions |
24 mm × 104 mm × 24.4 mm |
| Magnet Dimensions |
13 mm × 34.4 mm × 11.4 mm |
| Weight |
59 g |
Frequently Asked Questions
What is the DS-PDMC-EG2-WE(B) used for?
The DS-PDMC-EG2-WE(B) is a ax pro wireless magnetic contact detector designed to support security cameras or alarm components while housing and protecting connections.
What is the material of the device?
It is constructed from high-strength abs plastic, finished with a weather-resistant finish.
Can this be installed outdoors?
Yes. Where specified by its IP rating, it is suitable for outdoor installations, featuring weatherproof casing to withstand the elements.
Does it support internal cable routing?
Yes. Where applicable, the device or bracket is hollow, allowing you to run power and network cables internally to keep them protected from rain and vandalism.
Are the mounting screws included?
No. You must choose appropriate fixing screws or masonry expansion bolts depending on the structure you are mounting to.
What is the recommended mounting surface?
The mounting surface must be capable of supporting at least three times the total combined weight of the bracket and camera.
